[Artifact] Shamblo 17cm-airlift

Shamblo 17cm 3D-printed Mini Model
Scale: 1:1000
Dimensions: 17cm in length, 18cm in width
Shipment Color: Red wax color or light gray; Unpainted model only
Free Gift: 1:1000 scale Unicorn Gundam model
Articulation: Fully posable ball-and-socket joints; slight neck linkage movement
Note on Assembly: The default connection ports require sanding before assembly.
Important Assembly Tip: When inserting the ball-and-socket joints into the ports, rub the joint surface first and then gently press it in. Do NOT force the joint—this will cause the port to crack.
Production Specifications: 12K high-precision LCD resin 3D printing; made of ABS-like red wax resin.
It takes about 4-5 weeks for 3D printed parts to be shipped. 3D printed items cannot be returned or cancelled.

Need to paint yourself.

It takes about 4-5 weeks for 3D printed parts to be shipped. 3D printed items cannot be returned or cancelled.

The red wax parts have already been thoroughly cleaned twice with alcohol and an ultrasonic cleaner before shipping. Upon receipt, no additional cleaning is required - you can sand as needed and proceed directly to painting.

Important for printed parts:
• Never soak in water! 
• Never oven-dry! 
• This is a universal precaution for all printed parts worldwide.

Avoid water immersion as their structure can trap moisture. If accidentally soaked, ensure complete natural air-drying for at least 24 hours. Similarly for drying - excessive heat may increase the risk of cracking.